91Ƶ

91Ƶ Miserable Is the Global Economy?
Market News

91Ƶ Miserable Is the Global Economy?

The global economy at the beginning of 2020 was affected by the epidemic, and the global economy showed a downturn, which caused global concern.
Published: Jun 12, 2020
91Ƶ Miserable Is the Global Economy?

The Global Economy Plummeted

91Ƶ miserable is the global economy? "This year the global economy is "probably" experiencing the worst recession since the Great Depression of 1930!" the chief economist of the IMF warned.

According to the latest data from the Asian Development Bank, the epidemic may cause the global GDP to evaporate by nearly US$347 billion (about NT$10.5 trillion). The United Nations has simultaneously warned that the epidemic may cause the loss of 25 million people worldwide, which is more serious than the 22 million people who lost their jobs in the 2008 financial tsunami.

As a result, governments of all countries are facing great enemies, and both fiscal and monetary policies are working together to save the economy. At present, the world has announced an expansion expenditure plan of more than 8 trillion US dollars, of which the US budget has reached 2.3 trillion US dollars, the EU has also prepared 2.2 trillion US dollars, and the Chinese quota It also reached RMB 3 trillion.

As for monetary policy, the Federal Reserve Bank of the United States (FED) among the global central banks has cut interest rates by 4 yards in mid-March. The federal benchmark interest rate level is only 0 to 0.25%. It also announced that it will start quantification of up to 700 billion U.S. dollars Loose measures.

But under the stimulation of silver bullets from all sides, can it save the global economy? The IMF (International Monetary Fund), which recently released its economic forecast, is not optimistic and has reduced its global GDP growth from 3.3% to "-3%" in one fell swoop. Well-known Nobel economics observations, the retaliatory rebound, and V-shaped reversal expected by everyone may not be easy. It is more likely to be a U-shaped reversal of Niubi recovery.

10 Economic Trends

Show you why the world is smashing 800 million dollars to save the market. 91Ƶ bad is the situation?
  1. 28 years, China's GDP first saw negative growth
    In mid-April, the China Bureau of Statistics released an economic forecast. China’s GDP for the first quarter of 2020 was negative for the first time, at -6.8%, a record low since 1992. Expectations for a "V-shaped rebound in the Chinese economy" fell short.
    As the world's second-largest economy, China still has the roles of "world factory" and "world market", and it is the main economy that has resumed operations after new pneumonia. Therefore, China's economic figures are the global economic recovery Wind direction ball. 91Ƶever, China's GDP turned negative for the first time in the first quarter, which has severely dampened the global economic outlook.
  2. "Negative Oil Price" debuted, and oil futures once fell to "-37.63 USD"
    US West Texas Crude Oil once fell to a barrel of "-37.63 US dollars" in the futures session on April 20 (US time). This was the first record of "negative oil price" in history, triggering global panic and a stock market crash in various countries. But in fact, this is just gunfire caused by the trading rules, because the day is about to fall on the futures settlement day, but because long investors are optimistic about the price of oil will rebound, so the crude oil fund is deployed at a low price, but the oil price has not gone up. On the day of futures settlement, there were still a large number of open positions, which led to the embarrassment of the subsequent emergency sell-off but unacceptable trading, which caused the price of oil futures to collapse and turn to a negative number.
    Negative oil prices were short-lived, but, after the outbreak of January, the price of crude oil dived all the way. West Texas crude oil has fallen below $20 a barrel, and oil has entered the era of "one word." To save oil prices, OPEC+ (Organization of Petroleum Exporting Countries and its partners) has reached an agreement that 23 oil-producing countries, including the two major coffee producers in Saudi Arabia and Russia, will reduce production by nearly 10 million barrels of oil daily on May 1. But the global epidemic is not at an end. The industry is still not optimistic about whether the reduction in production will save oil prices.
  3. The number of unemployed in the United States is breaking records, approaching the Great Depression
    The number of unemployed in the United States is breaking records, approaching the Great Depression
    In April, the unemployment rate surged to 20%, twice the economic recession in 2009, and it was close to the tragedy of the Great Depression of the 1930s.
  4. Cliff fall! The U.S. PMI index fell sharply after the financial tsunami
    On April 23, the United States announced the April composite PMI index, which fell sharply from 40.9 in March to 27.4, the worst performance since October 2009. Besides, the U.S. manufacturing PMI for April was 36.9, which was lower than market expectations of 38.5; while the U.S. service, PMI for April reported 27.0, which was also lower than the market expectations of 32.5.
    From the above three PMI data, we can see that the United States is deeply affected by the epidemic, and the manufacturing industry frequently spreads layoffs and unpaid leave; coupled with the implementation of the social isolation policy, most people must work at home, attend classes, and the crowd of people eating and shopping on the street disappears, and the service The industry was hit hard.
    Economists at IHS Markit said that from the PMI data, it can be seen that the extent of the US recession in the second quarter will be more severe than during the financial tsunami.
  5. U.S. stocks melted three times, the worst quarter in history
    2020 is a disaster year for US stocks, and the fuse mechanism was triggered on March 9, the first time in 23 years. I did not expect to trigger the fuse mechanism again on the 12th and 16th, setting a painful record for the third monthly fuse in the history of U.S. stocks in the first quarter of this year, it fell more than 20%.
  6. The worst in history! European car sales plummeted by 50% in March
    During the epidemic prevention period, most countries implemented blockade measures, whether European or Japanese and Korean car manufacturers have ceased production, and most auto exhibition sales centers were closed, resulting in the largest decline in new car sales in Europe in March. According to the latest statistics of the European Automobile Manufacturers Association (ACEA) on April 24, the EU passenger car registrations in March decreased by 49.8% to 83,141 vehicles. Market estimates suggest that auto sales may not improve in April, exacerbating the potential for economic collapse.
    The other two major auto markets, the market predicts that the U.S. auto sales in 2020 will also be the worst in nearly a decade; China's auto market has also suffered a sharp decline, with new car sales plummeting 48.2% to 1.02 million units in March, and the winter is still long.
  7. The most deserted in history! Peach-machine travel volume continues to explore new lows
    To prevent the epidemic, governments of all countries ban flights, restrict entry and exit and severely impact the aviation and tourism industries. The number of passengers at Taoyuan International Airport hit a new low. In March, the number of outbound and inbound passengers decreased by about 86% compared with last year. As a result of setting a single-day zero-entry record for the terminal on April 14, to reduce operating pressure, Taoyuan Airport has closed 20 boarding gates and internal waiting rooms from midnight on the 17th.
    As an important means of transportation outside the airport, the average daily traffic volume of the Airport MRT in April dropped by 82%, and the flow of people and money was greatly affected. Jijie currently applies to the Ministry of Economy for water and electricity fee subsidies and hopes that the central government will rescue the subsidies and relieve the operating pressure.
  8. International trade is frozen, the BDI index fell 43% in the first quarter
    The epidemic has affected global demand and logistics, and international trade has been hit hard, leading to the continued downturn of the Baltic Dry Bulk Composite Index (BDI), especially in February when China closed its city. The BDI index once fell to more than 400 points, the lowest in recent years.
    BDI is currently the world's authoritative index for measuring the international shipping situation, and it is also a leading index reflecting the international trade situation. Due to the epidemic situation, the global implementation of crew entry control and bulk shipping demand has fallen, and it fell by 43% in the first quarter of this year. Although the BDI index is gradually recovering to 665 points, Esben Poulsson, chairman of the International Maritime Association (ICS), predicts that global container shipments may decrease by another 30% in the coming months.
  9. The worst since the Great Depression! The IMF predicts a 3% decline in global GDP and 4% negative growth in Taiwan
    The IMF (International Monetary Fund) originally estimated that global growth in 2020 will be better than that in 2019 to 3.3%. 91Ƶever, with the spread of the new coronavirus and the discoloration of all pigs and sheep, the IMF estimates that the global economy will decline by 3% by 2020. At the same time, Taiwan's economic growth has been revised down to -4%.
    "This is a crisis unlike any other. This year the global economy is "probably" experiencing the worst recession since the Great Depression of 1930," said the chief economist of the IMF. The global economy will achieve a partial recovery in 2021, but still, It will be lower than the trend before the outbreak of new coronary pneumonia, and there is still considerable uncertainty about the resilience.
  10. Taiwan's GDP is expected to be one! Taiwan Economics Institute predicts the bottom of the boom in the second quarter
    Compared with the IMF's pessimistic Taiwan economic growth, the Taiwan Economic Research Institute is relatively optimistic and still believes that Taiwan can maintain one, and expects the bottom to recover slowly in the second quarter and the second half of the year.
    According to the latest forecast of the Taiwan Economic Research Institute on April 24, the growth rate of domestic real GDP this year is 1.58%, down 1.09 percentage points from the January forecast. The Director of the Taiwan Academy of Economics, Zhang Jianyi, pointed out that Taiwan’s economic recovery will be somewhere between a V-shape and a U-shape, which is "recovery after a small base".
    The reason for the Taiwan Economic Research Institute’s optimism is that the epidemic in Europe and the United States has gradually slowed down, the financial market has been relatively stable, and the domestic epidemic prevention is appropriate. The government’s bailout plan will help demand rebound and will slow the impact of the epidemic on the economy.
Published by Jun 12, 2020 Source :

Further reading

You might also be interested in ...

Headline
Market News
Smart Milling Machines, IoT, and High-Speed Milling
Technological advancements in the machine tools industry are constantly shaping the way manufacturers approach production. The integration of Smart Milling Machines with the Internet of Things (IoT), often referred to as Industry 4.0, propels the industry toward unprecedented levels of efficiency and productivity.
Headline
Market News
CNC Milling AI Technology and Nano-Machining
Advancements in Computer Numerical Control (CNC) milling technology have propelled CNC milling machines into a new era of precision, speed, and efficiency. Nano-machining allows the fabrication of components and structures with dimensions on the nanometer scale, typically ranging from 1 to 100 nanometers. These technological advancements, combined with the integration of artificial intelligence (AI) and automation, have had a profound impact across manufacturing industries.
Headline
Market News
Innovations in Grinding Wheel Technology: Materials, Design and 3D Additive Manufacturing
From the rudimentary stones used in ancient times to the highly sophisticated wheels of today, the evolution of grinding wheel materials and design has been marked by a relentless pursuit of precision and efficiency. Early grinding wheels were often made from natural abrasives like sandstone. Today, materials such as aluminum oxide and silicon carbide, along with advancements in design and the introduction of additive manufacturing, have revolutionized the grinding process.
Headline
Market News
Environmental Sustainability in Grinding Operations
Grinding operations have significant environmental impacts, contributing to carbon emissions and resource depletion. The manufacturing industry is transforming for sustainability, with grinding machines adopting eco-friendly practices and pursuing green certifications to enhance their role in sustainable manufacturing.
Headline
Market News
The Evolution of Advanced Precision Grinding Machine Technologies
The evolution of precision grinding machines has been nothing short of revolutionary. With the integration of cutting-edge technologies, the sector has witnessed remarkable advancements, including the incorporation of Artificial Intelligence (AI), automation, and Industry 4.0. The latest innovations in grinding machine technology include the seamless integration of AI and automation, advanced control systems, as well as the profound impact of Industry 4.0 on grinding processes, driving higher efficiency, precision, and adaptability.
Headline
Market News
EDM in the Era of Industry 4.0: Challenges and Solutions
The integration of Electrical Discharge Machining (EDM) into Industry 4.0 marks a new era of smart manufacturing, where interconnected technologies, data-driven processes, and automation play pivotal roles. Incorporating EDM into the broader framework of Industry 4.0 has brought forth many new challenges, ranging from cybersecurity concerns to interoperability issues and the optimization potential of data analytics. These challenges have spurred the discovery of unique solutions to address them.
Headline
Market News
The Rise of Solid-State Drives: Accelerating the Future of Data Storage
As the demand for faster, more efficient, and reliable data storage solutions continues to increase at incredible rates, Solid State Drives (SSDs) have brought about a monumental leap forward from traditional Hard Disk Drives (HDDs). Known for their robust performance, durability, and efficiency, SSDs have quickly become the preferred storage solution over traditional HDDs.
Headline
Market News
Optical Switches: Revolutionizing Data Transmission
Optical switches are devices used in optical fiber communication networks to selectively switch or route light signals from one optical fiber to another without converting the optical signal to an electrical signal. They are used in optical communication networks, data centers, and other industries where efficient signal routing and switching are paramount.
Headline
Market News
Lighting the Way: The Rise of Solar Powered LED Lights
Solar Powered LED Lights merge the low power requirements of LED technology with the renewable energy capabilities of solar power, offering an eco-friendly solution for diverse lighting needs across various settings. From emergency response and relief efforts to captivating art exhibits, creative minds are continually discovering new and innovative uses for this transformative technology.
Headline
Market News
Maximizing Connectivity: USB-C to HDMI+VGA+Audio Splitters
With the ever-increasing complexity of electronic devices such as smartphones, laptops, and PCs, there has been a corresponding need for versatile and efficient ways to transmit the ever-increasing data and multimedia. To meet these rising data transfer needs and enhance digital connectivity, various forms of connectors have been designed.
Headline
Market News
The Art of Bicycle Manufacturing: Blending Tradition with Innovation
From traditional craftsmanship to modern production techniques, bicycle manufacturing represents a blend of artistry, precision engineering, and technological innovation. The contrast between traditional and modern techniques can significantly affect the final product’s quality, performance, appeal, and brand loyalty. Quality control and testing protocols, along with collaborative efforts that drive innovation, and the enduring value of craftsmanship, significantly influence the art of bike building.
Headline
Market News
USB “Fast Charge” Car Chargers: Evolution and Technology
Staying connected in today’s digital world is no longer a luxury—it's a necessity. Reliable and continuous use of smartphones and other portable electronics would not be possible without the constant connectivity offered by portable USB chargers. One very important category of USB chargers is those used in cars, which convert the car's 12V electrical supply into a USB-compatible electric output suitable for consumer electronics. This has led to a robust market for USB car chargers, highlighting the unique applications and benefits of these types of chargers.
Agree