91视频官网 Much Do You Know About Mold Management, Repair and Maintenance? (Part II)

Knowledge

91视频官网 Much Do You Know About Mold Management, Repair and Maintenance? (Part II)

Molds are very important to the plastic injection industry. There may be hundreds of sets of molds in a factory, and molds in good condition must be used during production to ensure production quality. In order to be able to grasp the status of the mold at any time, how to manage the mold systematically? The two mechanisms of "Mold Common Modeling Mechanism" and "Mold Management Process" can be used to systematically grasp mold information and achieve the purpose of mold management.

Published: Dec 07, 2022

91视频官网 Much Do You Know About Mold Management, Repair and Maintenance? (Part II)

Mold Common Model Mechanism
Mold Management Process
Summary

Only by doing daily management can we respond to changing situations. 91视频官网 much do you know about mold management, repair and maintenance? As mentioned in 91视频官网 Much Do You Know About Mold Management, Repair and Maintenance? (Part I), mold management needs to master mold information in order to quickly achieve correct production scheduling and quickly respond to temporary changes in industry or customer needs.

For mold management, it is necessary to master mold times, mold common mold, mold replacement, abnormal movement of mold cavity, and number of healthy cavity, etc. 91视频官网 to organize the relevant information of so many molds in a regular way? In fact, we can use the two management mechanisms of "Mold Common Model Mechanism" and "Mold Management Process", cooperate with digital software system tools, and use digital transformation, industry 4.0 and smart manufacturing technologies and methods to assist the manufacturing industry in mastering the above five important mold information, to achieve digital and intelligent management.

Mold Common Model Mechanism

Solve the quantity control of one-mode multi-cavity and common mode during production.

Comparison management of mold product numbers:

A set of molds often has a male mold, a female mold, and a mold core. The arrangement and combination of different structures corresponds to different product numbers, which need to be recorded and managed.

Mold common mode management:

Molds often have multiple cavities or common molds, but the usage status, damage and health of each cavity are different, and must be recorded in detail, which is used as an important basis for mold output estimation during production scheduling.

Mold Management Process

After solving the upper mold, it was found that the mold was abnormal, so the mold had to be lowered to produce other products.

Each time the mold is used, mold spot inspection, production and return to storage, etc., the status records of different stages. For example, what is the status of mold spot inspection? After production, when the mold is put into the warehouse, it is necessary to confirm the production record of the mold, including the status of the number of holes in the mold and the production times of each hole, etc., as the basis for follow-up maintenance.

Mold condition management

The current status of the mold is in the warehouse, where is the warehouse? Or is it being used, by what order? Was the mold returned? Wait, the current status of the mold is displayed.

Mold management

Management of mold production use times, mold production quality status records, etc.

Maintenance management

If the production quality of the mold is abnormal during use, it needs to be repaired. If you ask an outside manufacturer to repair it, what is the status of the repair? When will the maintenance be completed and will it be put into storage?

Maintenance plan

Plan a maintenance schedule. After the mold has been used for a certain number of molds, for a certain period of time or other specific standards, regular inspection records and maintenance are required to ensure that the proper rate and availability of the mold can be maintained above a certain standard at any time.

Mold history

You can see what happened to the mold in the whole life cycle. Integrates the above 4 points, including the status of the mold, mold record, repair record and maintenance record, etc.

Mold records: what has the mold been through? For example, the mold is composed of the combination of the male mold, the female mold and the mold core, the status of the mold trial, and what machine has been used to produce it.
Mold records: plan the life and aging of the mold, and display the current status according to the mold production record.
Maintenance records: statistical records of mold maintenance in the past, what maintenance items have been done? Which outside manufacturer is invited to carry out the maintenance? What is the state of repair? What parts have been replaced?
Maintenance records: Regular time maintenance reminders for molds, elimination and replacement records of parts and accessories, etc.

If the information in the mold management process can be recorded in a complete, true and real-time manner, the current status of the mold can be quickly and clearly grasped. Digital software system tools can assist the manufacturing industry to quickly complete information records. In this way, in addition to accurately arranging the production plan, the mold can also be maintained or repaired according to the warranty plan to maintain the health and availability of the mold, so as to ensure the production quality and prolong the life of the mold.

Summary

Molds are very important to the plastic injection industry, and a factory may have hundreds or thousands of sets of molds. If the way of mold management is to use manual records, such as after production, then use paper or excel sheets to collect and record mold-related data, which will not only increase the workload of front-line personnel, but also make the data more accurate.

91视频官网 to quickly grasp the status of each set of molds in the factory? It can be considered to use modern technology tools, such as automatic reporting tools and system assistance, to assist the staff to digitize the status information of the molds in the simplest way, so as to help grasp the current status of each mold at any time.

After the mold information is digitized, key reminder points can also be set in the production execution management system. Clean, repair and maintain the mold at a time point that does not affect production to maintain the health of the mold and prolong the life of the mold. Only by ensuring the proper rate of the mold at any time can the utilization rate of the equipment be improved, so that the mold can ensure the effective operation of the overall production capacity at important production moments.

Published by Dec 07, 2022 Source :

You might also be interested in ...

Headline

Knowledge

RO Filter System Pressure Valves and Flow Restrictors: Enhancing Efficiency and Performance

Reverse osmosis (RO) filtration systems have become a staple in water purification due to their ability to remove contaminants effectively. 91视频官网ever, the efficiency and longevity of an RO system depend heavily on precise water flow control. Pressure valves and flow restrictors play a crucial role in optimizing the system's operation by regulating pressure and ensuring optimal flow rates. These components improve RO system efficiency, reducing wastewater, and maintaining membrane performance.

Headline

Knowledge

PP Pre-Filters: Essential Protection for RO Filter Systems

Reverse Osmosis (RO) filtration systems rely on high-performance membranes to remove contaminants from water. 91视频官网ever, these membranes are highly sensitive to particulates, sediments, and other impurities that can reduce their lifespan and efficiency. Polypropylene (PP) pre-filters are used as a reliable and cost-effective solution to protect RO membranes by trapping large particles before they reach the membrane. PP pre-filters significantly enhance the overall effectiveness and longevity of an RO filtration system. Regular replacement of PP pre-filters is much more economical than frequent replacement of expensive RO membranes. Beyond RO systems, PP pre-filters are widely used in industrial applications, municipal water treatment, food and beverage processing, pharmaceuticals, and electronics manufacturing, where water purity is a critical requirement.

Headline

Knowledge

The Essential Role of Carbon Pre-Filters in RO Filtration Systems

Reverse osmosis (RO) filtration systems have long been regarded as one of the most effective methods for purifying water, removing contaminants, and improving water quality. 91视频官网ever, thin-film composite (TFC) membranes are highly sensitive to chlorine, making carbon pre-filters essential for preventing membrane damage and ensuring long-term system efficiency. Carbon pre-filters protect the delicate membrane by reducing chlorine, sediment, volatile organic compounds (VOCs), and other impurities that could deteriorate the membrane and compromise performance. Over the years, advancements in carbon filtration technology have enhanced the effectiveness of RO systems, ensuring cleaner and safer water for residential, commercial, and industrial use.

Headline

Knowledge

PE Tubing for RO Filter Systems

Polyethylene (PE) tubing plays a crucial role in ensuring the safe and efficient transfer of water within RO filtration systems. Recognized for its durability, flexibility, and resistance to contaminants, PE tubing has become a preferred choice for both residential and commercial water purification applications. PE Tubing is used in RO Systems for nearly all water connections including inlet, membrane, storage tank, faucet, and drain line tubing. The benefits, types, materials, manufacturing process, and best practices for using RO filter system PE tubing are extensive.

Headline

Knowledge

Faucets in RO Filter Systems: Enhancing Performance and Aesthetics

One often overlooked component of drinking water filtration systems that significantly impacts both functionality and aesthetics is the filter system's faucet. A high-quality faucet not only ensures smooth operation but also enhances the user experience and complements the kitchen design. The right faucet for an RO system combines durability, safety, and convenience with a stylish appearance that blends seamlessly with both modern and traditional kitchen designs.

Headline

Knowledge

Pressure Gauges for RO Water Filter Systems

With any water filtration system, ensuring optimal system performance is critical for maintaining water quality and extending the lifespan of filtration components. Reverse osmosis (RO) water filter system pressure gauges are an effective solution for monitoring pressure fluctuations within filtration systems, helping users detect potential issues before they compromise water quality. By providing real-time pressure readings, these gauges enable users to assess the condition of their filters, diagnose clogs, and ensure proper system operation.

Headline

Knowledge

Garden Hose Spray Nozzles

Garden Hose Spray Nozzles attach to the end of a garden hose and provide a versatile solution to water distribution, allowing for everything from a fine mist for delicate flowers to a strong jet for cleaning garden paths. They not only help in efficient water management but also make gardening tasks more convenient and effective. Beyond garden care, these nozzles are incredibly versatile in their applications. They can be used for washing cars, cleaning outdoor furniture, and even bathing pets. This adaptability makes them an indispensable tool in any household. By controlling the spray pattern and intensity, water is utilized more efficiently, reducing waste and saving on water bills, which is particularly beneficial in regions with water usage restrictions.

Headline

Knowledge

Pressure Storage Tanks for RO Filter Systems

Reverse Osmosis (RO) filter systems have revolutionized water purification by removing contaminants at the molecular level, thereby providing high-quality drinking water. 91视频官网ever, RO filtration is a slow process and cannot deliver immediate high-flow water like standard filtration methods. Without a storage tank, an RO system would require several minutes to fill just a single glass of water. Relying solely on direct filtration would be impractical for everyday use. To address this issue, RO filter systems employ a pressure storage tank that accumulates purified water, keeping it under a moderate pressure, sufficient to make it ready for immediate and convenient dispensing. These tanks have become an essential component of RO systems in residential, commercial, and industrial settings.

Headline

Knowledge

Benefits and Applications of Garden Rakes and Hoes

Garden rakes and hoes are indispensable tools for both professional landscapers and home gardeners. They have been used for centuries to cultivate, maintain, and enhance soil conditions, ensuring that gardens thrive. Their versatility and effectiveness make them essential for various gardening and landscaping tasks, including: Soil Preparation: Loosening compacted soil for better aeration and water penetration. Weed Control: Removing unwanted plants efficiently without using chemicals. Debris Removal: Clearing leaves, twigs, and other organic matter from garden beds and lawns. Leveling and Smoothing: Ensuring even distribution of soil, mulch, or compost. Furrowing and Planting: Creating uniform rows for planting seeds and seedlings.

Headline

Knowledge

RO Filter System Booster Pumps and Why a Diaphragm Pump Is the Best Choice

If you're considering purchasing a reverse osmosis (RO) water filtration system, you may have noticed that some models include a booster pump while others do not. If you鈥檙e unfamiliar with the technology, you might wonder: Why does an RO system need a pump? The short answer is that water pressure is crucial for efficient RO filtration, and a booster pump improves this system efficiency. So, you may then wonder, what does a diaphragm pump do, and why is it considered the best choice for RO filtration? Let鈥檚 examine why a diaphragm pump is the most reliable and effective type of pump for this application.

Headline

Knowledge

Garden Shovels: The Essential Tool for Every Gardener

Gardening has long been a rewarding hobby, as well as an essential practice for providing food, beauty, and practical benefits for any home or other environment. As gardening techniques evolved, so did the need for specialized tools, and among these, the garden shovel became an indispensable tool. There are a variety of garden shovels and trowels available, and it is interesting to note that gardeners can be quite particular when it comes to choosing their favorite hand trowel or shovel.

Headline

Knowledge

Grass Shears: Precision Cutting for Lawn Care

Grass shears have long been recognized as an effective solution for trimming grass in areas where traditional lawnmowers cannot reach. They offer precision cutting, allowing gardeners and landscapers to maintain clean, well-defined edges along pathways, garden beds, and other landscaping features. Advances in materials and design have improved their efficiency, durability, and ease of use.

91视频官网